Plastic panels are becoming more and more popular in the construction market today. This is no coincidence, because if you install such material in a toilet or bathroom, the room will look aesthetically pleasing and neat. The panels are easy to care for, they weigh a little. Take a closer look at this finish option when renovating a bathroom or toilet. The panel is attached to the frame with a stapler or self-tapping screws. Spotlights are built into the ceiling of this material.

Advantages of PVC

A plastic ceiling is the most correct solution, as it has advantages over other materials:

• not afraid of moisture;
• withstand temperature fluctuations in the room;
• does not absorb moisture;
• does not swell under the influence of moisture;
• at elevated temperatures does not increase in size;
• hygienic, does not allow the development of mold and fungus;
• thanks to the excellent reflectivity of the panels, the toilet becomes lighter, and because of this, the consumption of electrical energy is saved;
• electric wires that go to the lighting fixtures are removed under the panels;
• the surface of the walls and ceiling becomes even.

The plastic panel is a long strip with an average width of 25–30 cm. The end is cut off, and locks are arranged on the sides, with which the elements will be connected during installation.

In the photo - PVC in the context. Inside there are stiffening ribs. That's why material is light but at the same time durable.

Profiles for panels

This material is for decorative design when covering the ceiling or walls in the toilet or in another room using PVC panels. It is divided into the following types.

• starting profile. Closes the cut ends of the panel. Fastened around the perimeter of the room.

• Profile F1 closes the cut end at the outer corner when it is required to change to another plane. It is used in the event that one of the walls is sheathed, but the one around the corner is not.
• Profile H (connecting). Serves to lengthen the strip, if it is not enough.

• The outer and inner corners are designed to cover the ends in the corresponding corners.
• The ceiling plinth is arranged in the same way as the starting profile, but has a more attractive appearance.

Pros and cons of installing PVC panels

Each of the materials intended for cladding has its own advantages over others. The PVC panel also has many positive properties:

• aligns the curvature of walls and ceilings in the premises, while it is not required to dismantle old coatings;
• installation is quick and easy;
• heat and sound insulation is laid behind the panels;
• lack of dust and "wet" process;
• affordable price.

Disadvantages of plastic:

• it will not be possible to complete a multi-level ceiling;
• some panels look "cheap";
• you can see the connection between the panels.

Therefore, when planning repairs in the toilet or bathroom, it is advisable to take a closer look at the quality of the material. After all, the better it is, the more expensive, and, accordingly, appearance more attractive. For this reason, the PVC panel is limited in application. It happens that when installing a lighting device plastic ceiling translucent.

Important! Before you buy plastic material, weigh all the pros and cons so you don't regret it later.

Calculation of material for installation

First, calculate the area of ​​\u200b\u200bthe ceiling in the toilet. Then divide the resulting figure by the total area of ​​​​one PVC panel. Add 15% to the resulting number for trimming and round up to a whole number.

To calculate the amount of a metal profile, follow the ceiling diagram in the toilet, observing the scale. Determine where the parallel lines will go across the ceiling. They are necessary for attaching the profile. The interval between parallel stripes is at least 50 centimeters. Based on such calculations, it is easy to calculate the required amount of material.

To fix along the perimeter of the surface, you need to purchase a UD strip, and for guides - CD. To attach PVC strips to the profile, you will need self-tapping screws with wide caps.

To complete the work on finishing the ceiling will help plastic plinth. To calculate its amount, measure the perimeter of the ceiling, divide this number by three, and then round up.

Mounting the frame for PVC panels

The installation of the frame in the toilet is carried out using the above-mentioned profiles: CD and UD. Wooden slats are also used, but much less often, because wood is exposed to moisture, especially in a room such as a bathroom or toilet. The tree is subject to decay and will last less.

How to properly install the frame?

1. Perform markup using a level. In a large room, it is better to use a long level, and in a small toilet, a simple rack tool will suffice. Marks are made for the guide profile. The location of suspended PVC panels on the ceiling depends on them.
2. The profile, if necessary, is cut to the size of the room (profile length - 3 meters). It is drilled in increments of 50-60 centimeters. After that, the guide profile is applied to the wall, the holes are marked on it, the dowels are drilled and inserted. Each time check the horizontal level.
3. The rigidity of the frame is given by the ceiling profile. The mount for it is chosen, taking into account the distance to the base: if the gap is insignificant, then you can use a U-shaped suspension. If it is large, then it is better to take quick hangers with knitting needles. Sometimes specialists make special “boots” for the UD frame. To do this, cut the metal with the letter "G" and attach it with the smaller side to the ceiling, and the larger one - to the carrier profile.
4. Hangers are attached to the screws, checking by level. The step between the profiles is 50 centimeters, they are placed perpendicular to the PVC panels.

Definition of quality

When buying, carefully inspect the panels. Quality products are even, the pattern is evenly distributed. The face is smooth and even. Distortions and curvature of lines are not allowed.

Important! Count the number of stiffeners inside the panel. The more there are, the stronger the structure.

The thickness of the stiffening ribs and the outer walls of the plastic plays a role. Take two strips and try to connect them. The main thing is not the quality of the connection, but the ease of docking. There should not be a large gap between the stripes. To determine the strength of a material, take a strip and squeeze it hard, then inspect the surface. If it is not deformed or cracked, it is quality material. But slight deformation is acceptable.

Check the strip for bending. To do this, bend and straighten it 3-4 times. If after this procedure the material survived, then you can work with it. Poor quality plastic will deteriorate during installation.

What is required to work with plastic?

An important role is played by the color solution. Today this is not a problem, and everyone will find for themselves interesting option.

Sheathing the toilet is impossible without the source material and tools. You will need the following:

• A sharp knife to reduce the size of the plastic strips. Kitchen knife ruin the material and cut unevenly.
• Self-tapping screws for fastening strips.
• Wooden bars for the frame with a section of 3 x 10 cm or the metal parts described above.
• With the planned fastening of the panels directly to the wall, you will need liquid nails or mounting foam.
• Any repair will not do without a tape measure.
• Building level for mounting the frame.
• The plinth is decorative, which is attached to the wall.
• profile corners.

Mount selection

Before starting work, determine how you are going to fix the panels: mounting foam or using a framework.

The first option involves the purchase of foam cylinders. When purchasing a product, pay attention to the expiration date. Fresh foam will yield more. If the toilet is spacious and there is brick walls, it is not necessary to mount the frame. It is allowed to fix PVC panels on the glue "liquid nails". This work is not difficult, but it requires patience.

How to cut plastic material?

This process is easy. They take the strips and lay them on the base with the wrong side. Then an incision is made sharp knife to make a line. The plastic is broken along it and again completely cut off with a knife along the intended line.

Preparation for work

Repair of the toilet and preparation for lining begins with cleaning: sockets, lighting fixtures, hoses, pipes are removed from the walls.

If a frame mounting method is chosen, it is more rational to use galvanized parts. If you took a wooden beam, treat it with an antiseptic.

First, the frame is mounted, and then the strips are installed where the panels are inserted. The work on facing the ceiling in the toilet starts from the corner. One edge of the PVC strip is inserted into the profile, and then the other side is attached to the screws

The next strip is easier to insert, it is pushed until a click occurs. And again, the other side is attached with self-tapping screws. Then install the plinth and decorative lining. With their help, you can veil defects and technological gaps. They are fixed with glue, as these are purely decorative details.

Almost everyone will be able to repair the toilet using PVC panels. The process is shown in detail in the video:

8479 0 0

How to mount PVC panels for the toilet yourself, and why they are good

It so happened that tile traditionally reigns in our bathrooms. There is nothing to say here, the lining is certainly good and reliable. But such pleasure does not come cheap. Apart from the cost of the material itself, it is often necessary to pay almost the same amount for laying, because not everyone can handle such work. But now there is a great alternative - PVC panels for the bathroom and toilet. Based on my own experience, then I will tell you why people love PVC panels so much and how to mount this coating with your own hands in several ways.

Why people choose PVC panels

I will not argue that PVC cladding with toilet panels is the best and almost the only possible option, but nevertheless, such a cladding has much more advantages than disadvantages, judge for yourself:

• Everyone knows that only wallpaper is lighter than plastic, therefore, any base will withstand such a lining. In this case, it does not matter at all what kind of walls you have, concrete (including newfangled foam and aerated concrete) or wood. Plastic will fit perfectly both on the walls and on the ceiling;

• If you choose traditional frame mounting, then you do not need to align the walls. Many prefer not to even plaster. You can imagine how much the cost of the project is reduced;
• Polyvinyl chloride material is absolutely resistant to any humidity, plus on modern models fungus and mold do not start, they are initially covered with an antiseptic. While moisture resistance should not be confused with waterproofing, PVC cladding is exceptionally good. decorative coating, waterproofing is different and, for example, in the bathroom, it will need to be equipped separately even before the installation of plastic;
• Caring for such panels is no more difficult than caring for tiles. A simple sponge and a traditional detergent are enough here;

• Modern plastic has a wide palette of colors and textures, such cladding can imitate most popular coatings, which is much superior to the same tile;
• And finally, self-finishing the toilet PVC panels costs at least 3-5 times cheaper than professional installation of good tiles. Agree, it is difficult to argue with such an argument.

This cladding also has negative points, but they are rather controversial:

• So opponents immediately point out that plastic burns and at the same time releases toxic compounds. This is true, but modern panels are made of self-extinguishing material, they can only melt from a cigarette or a short circuit, a strong fire is extremely unlikely. And if you are not going to fry a barbecue or warm yourself by a fire in the toilet, then you have nothing to be afraid of;

• Some say that do-it-yourself finishing requires serious preparation, and so, from my own experience I can tell you for sure that they are lying to you. If you are able to drill a hole in the wall with a puncher, and are not afraid of screwdrivers and hacksaws, then you can do it, such work will not be a problem for you;
• The only real drawback in my opinion is a small loss of usable space. The fact is that with frame mounting, you really lose at least 30 mm on each surface. Although do not forget that there is also a frameless version. I will also talk about this technology.

Technology and mounting options for PVC panels

Like any similar work, repairing a toilet with PVC panels is conditionally divided into several main stages. This is, first of all, the choice of material, the preparation of the base and the actual installation itself.

Finishing the toilet with PVC panels begins only after the floors are equipped, plumbing and doors are installed. All capital parts, for example, a sink or a heavy wall cabinet are attached to the base.
The maximum that you can hang on a plastic cover is a small framed photo or a light mirror. On the ceiling, such a panel can still withstand the built-in LED spotlight.

A few words about the choice of material

External coverage data is, of course, important, but most bathrooms in domestic apartments do not shine with dimensions, so I recommend paying priority attention to the strength of the panel. If this does not play a special role on the ceiling, then thin plastic on the wall can be easily pushed through by accidentally leaning on it or hitting it with an elbow.

When choosing panels, pay attention to the front side. If internal stiffeners are visible on it, then you are dealing with a thin, low-quality material and you should not take it.

In general, PVC panels are for outdoor and interior decoration, we are naturally interested in the second option. The width of such slats varies from 120 mm to 500 mm.

Now let's talk about the material for the frame. If you have had to install drywall, and you know how to handle UD and CD profiles, then such a frame will be almost ideal.

For people who are far from such work and are faced with mounting the frame for the first time, I recommend using wooden slats. The minimum size of such rails is 20x25 mm. But if the loss of usable area of ​​10 mm does not play a big role for you, then it is better to mount the frame from a 30x30 mm bar.

Do not save on docking fittings, all sorts of corners, plinths and fillets should be taken with a small margin. When cutting corners, it is very easy to make a mistake, and you definitely don’t want to run for a new bar to the market. Moreover, the price of such a product is quite affordable.

In addition to frames made of metal profiles and wooden block, similar designs can be assembled from special guides with movable clamps. Such a cladding is more expensive, but it is very easy to dismantle and reassemble if necessary.

Frame installation

First of all, remember that the frame guides are mounted perpendicular to the PVC facing strips. In wet rooms, which are the toilet with a bathtub, most often the panels are mounted vertically, respectively, the frame slats run horizontally. This is done so that water does not accumulate in the locks, but flows down them.

As you understand, between the plastic coating and the wall we have a gap equal to the thickness of the frame slats. In a warm and humid room without drafts, this is just a resort for fungus and other similar vegetation. Therefore, even before the start of work, the entire room must be covered with an antiseptic a couple of times.

There are enough similar compositions on the market now, and with a waterproofing effect. Although if you are dealing with brick or classic concrete wall, then you can limit yourself to two or three times the surface treatment with a solution of copper sulfate, it is cheap and quite effective. Some whiten with lime, it dries well. But in both cases, the result is quite worthy.

Wood and aerated concrete must be covered with a deep penetration waterproofing primer. Here it is better to use special compositions, they are different and all have instructions, so there is no point in writing about it.
Theoretically, you can paint oil paint, but it is not durable and such savings will cost more.

If the frame is made of wooden bars, then they should also be well saturated with an antiseptic. Of course, you can spend money on a special compound, but I prefer to keep it simple, cover it with machine oil a couple of times, cheap and effective. Such slats will stand for more than a dozen years and nothing will happen to them.

You need to start the installation of the frame by installing vertical support rails around the perimeter in all corners. This is the main skeleton of the structure, guide fittings will be attached to it, so they need to be mounted clearly on a plumb line. If the wall is very curved, then wooden wedges are placed under the planks.

Fastening of any frame strips is carried out according to standard scheme. First, a series of through holes is made in the plank with a thin drill, so that the drill leaves a mark on the wall. After that, the bar is removed, and holes for plastic dowels are drilled in the designated places. When everything is ready, you just have to insert the dowels and fix the bar with self-tapping screws.

There is one small nuance here. Vertical guides should not rest against the floor and ceiling, a gap of about 5 mm is left between them. As a rule, during installation, trimmings of the same plastic are inserted from above and below, and after fixing with self-tapping screws, they are pulled out. It is advisable to drill under the screws on the bar under the screws, so that the hat is hidden in the bar.

With the installation of horizontal rails, everything is a little easier. They are also fixed to the walls with self-tapping screws, but in order for the bars to stand on the same level (meaning the case with strongly curved walls), they are screwed to the ends of the side vertical supports.

This can be done using metal corners or simply by driving a self-tapping screw from the side, at an angle of 45º into both strips at once. On curved walls, so that the planks do not bend, wedges are placed under them.

Horizontal guides, to which the PVC panels will actually be attached, are installed in increments of 30 - 50 cm, it all depends on the strength of the panels themselves.

Often in city apartments, all communications, that is, a sewer riser, plumbing, and so on, run along the back wall of the toilet. So, PVC cladding provides an excellent opportunity to hide all this "beauty". In this case, the two vertical support rails are mounted not at the rear corners, but in front of the pipe package. On them, with the help of corners, a horizontal crate is fastened and sewn up.

And in order to provide access to communications, hinged doors made of or OSB boards can be fixed on the same rails. By the way, these doors can also be sheathed with plastic, as a result they will merge with the general background.

Paneling

PVC sheathing with toilet panels, more precisely fixing them on wooden frame may be performed in different ways. Some masters recommend using small carnations with wide hats for this. Theoretically, this is possible, there is no error here.

But there is one important nuance. You will have to hammer these nails into a narrow mounting strip at the edge of the panel and if you miss once and hit the panel itself with a hammer, it will crack and need to be replaced.

Now there is such a convenient device as a construction stapler. The plastic mounting bar at the edge of the panel is itself thin and easily punched through by the sharp legs of the metal brackets.

The price for this stapler is quite adequate, plus it can come in handy more than once on the farm. And if you are absolutely sure that you will not have to disassemble the plastic lining in the foreseeable future, feel free to mount it on brackets.

But personally, I prefer to mount the panels on small self-tapping screws. True, for this it is desirable to have a normal screwdriver, wrapping such a number of screws with a screwdriver will tire your hand.

This method is also good because it doesn’t matter at all what kind of frame you have, wooden or assembled from metal profiles. It’s just that one type of self-tapping screws is taken for wood, and another for metal.

The technology itself PVC mounting panels is extremely simple. First, fittings, that is, corners and skirting boards, are attached to the guides. This is an important stage, here everything should be as accurate as possible. The grooves in all guides have a depth of at least 10 mm, this must be taken into account when cutting the planks.

In my opinion, it is best for PVC panel lovers to cut with a hacksaw. Some masters cut with a sharp shoe knife or even metal scissors, this is possible, but in order not to spoil the edge, you will need to practice.

Polyvinyl chloride is prone to temperature deformations, so the bar itself is cut off taking into account the damper gap to compensate for expansion. Simply put, you need to measure about 5 mm less than the maximum size in length.

Then everything is simple. The bar is slightly bent, inserted into the lower and upper guides of the fittings, and then advanced until it enters the side groove of the starting corner. Now you need to fix the panel on each horizontal rail with a self-tapping screw or bracket.

The plastic panel has a spike on one side and a groove on the other. The spike of the first panel should be hidden in the groove of the fittings. The spike of the next panel is inserted into the groove of the previous one, after which it is fixed on the guides. And so on, until you sew up the entire wall.

Particular attention should be paid to the end panel. In the vast majority of cases, it will need to be cut along the entire length. It is cut off approximately 5 mm narrower than the maximum distance between the grooves of the previous panel and fittings.

After that, insert it into the guides and first push it all the way into the groove of the fittings, and when it enters, slide it back until it fully enters the groove of the previous panel. As you remember, the grooves on the fittings are much deeper and the difference in size will not be noticeable.

It is inconvenient to start the extreme trimmed strip immediately into the upper, lower and side groove. So that the edges of these grooves do not straighten out or even worse do not crack, I recommend bending them in advance with the help of wide metal spatulas, although an assistant is needed here.

If, when installing the extreme PVC panel, you managed to stretch the plastic walls of the grooves, which happens quite often, you can return them to their original appearance by heating them with a hairdryer and ironing the plastic through the fabric with an iron. And in order not to damage the panel itself, while you are heating, insert the blade of a metal spatula into the groove.

I already mentioned above that there is also mounting on kleimers. So, here you will need special guides. They are equipped with two grooves into which the kleimers are inserted and move along them like on rails.

By itself, the kleimer is a flat metal bracket with a small "tongue". When you insert the bar into the grooves and advance it until it stops, the clamper is adjusted from behind and presses the mounting strip with a tongue. No screws or staples for you, everything is simple and beautiful.

Instructions for lining the toilet ceiling with PVC panels are not much different from wall cladding technology. Unless you first need to lay electrical cable under lighting, and hide it in a corrugated metal hose. Naturally, when installing the frame, it will be necessary to take into account the depth of the built-in ceiling soffit. The hole for it is cut out with a special crown using an electric drill.

Subtleties of frameless mounting

PVC panels for the bathroom and toilet can be mounted without a frame, directly on the walls and ceiling, only for this smooth curvature on the plane should not exceed 3 mm, there is no question of any potholes and distortions at all. The technology in this case is much more accessible - the panels and fittings are simply glued to the walls and ceiling.

As the main adhesive composition, as a rule, the so-called "Liquid Nails" are used, this is a fairly common construction adhesive with an optimal price-quality ratio.

But working with him has one peculiarity. First, glue is applied to the wall and a panel is applied to it. After that, it comes off and is left for 3 - 4 minutes for winding, and only after that the PVC plank is finally glued.

On this topic, I have a case from life, it will be useful for you. One of my acquaintances, having bought an apartment on the secondary market, inherited from the previous owners of the service, taxed tiles. The tiles were good, but very old and ugly. There was neither the desire nor the means to knock it down and lay down a new one, and the dimensions of the premises were more than modest, frame installation would have made them generally miniature.

The man acted simply. He washed and degreased the tile well, then cut the PVC panels and glued them to the tile using double-sided construction tape. On a panel 250 mm wide, he used 3 fixing strips, but this is not a dogma, you can glue it in different ways.

When funds appeared, and it came to expensive elite repairs and redevelopment, it was very problematic to tear off this plastic. So keep in mind, this option also has a right to exist.

Conclusion

August 1, 2016

If you want to express gratitude, add a clarification or objection, ask the author something - add a comment or say thanks!

Plastic panels are one of the easiest and most convenient ways to finish a bathroom. However, many of those who plan to make repairs in the toilet do not even consider using this material. Most often, plastic panels are neglected because they seem to people not beautiful enough and aesthetically pleasing.

PVC panel production technologies make it possible to produce products of excellent quality and appearance. Potential buyers have a choice among hundreds options, so the design of the toilet, finished with plastic panels, can be very stylish and modern.

Advantages

Let's start the story about the design features of the bathroom, in which plastic panels are used as the main finishing material, with a description of the advantages of this finishing method. These include:

• strength and durability material;
• ease of maintenance, good tolerance to various cleaning agents;
• quick and easy installation, does not require experience in repair work;
• low cost;
• resistance to high humidity and temperature fluctuations
• choice among the many options for colors and textures;
• no need for rough wall finishing;
• thermal and soundproof material characteristics.

Minuses

Like any other finishing material, plastic panels, besides a row positive sides, also have negative ones. The most significant disadvantages of finishing the toilet with PVC panels are:

• material susceptibility to fire: plastic not only melts and deforms when heated, but also ignites easily when in contact with open flames;
• resistance to mechanical damage: despite the fact that PVC panels are strong enough, they can crack or split from a strong impact;
• mounting plastic panels produced on a frame that eats up several square centimeters of usable area in addition, the panels themselves can be quite thick.

Color solutions

There are several popular color options for plastic panels. Which one to choose for decorating a bathroom depends, first of all, on the future style of the interior.

Plain panels are a universal solution. They will become the backdrop for furniture, plumbing and other decorative elements. For small rooms, it is recommended to choose neutral, light shades, and in spacious toilets it is quite possible to use bright or dark colors.

Panels with a pattern will appeal to those who want to make the design of the bathroom more expressive. Floral and floral ornaments are in great demand, as well as abstract geometry - patterns of circles, lines, etc. For the design of toilets, the theme of the sea and the underwater world is also often chosen, so a large assortment of PVC panels with the image of shells, sandy beaches or marine life is presented in hardware stores.

Panels imitating natural textures look very impressive. However, so that such an interior does not look cheap, you should choose high-quality products with an impeccably applied pattern. wooden beam, marble, stone and brickwork- These colors are the most popular among buyers. In the toilet, such panels must be combined with matching interior items and sanitary equipment.

For every home master, do-it-yourself repairs are a matter of special pride. However, what to do if the owner of the apartment has no experience in construction and finishing work? In such a situation, it is better to refuse to carry out repairs in the living room and in the kitchen with your own hands. To gain the necessary experience in renovating premises, you can start small - execute Finishing work in the toilet.

This choice is quite logical, since the bathroom is the smallest among the premises of the apartment. In addition, a wide variety of materials are offered on the market, which allows the home master to implement absolutely any design when performing repairs in this room. Ideas for decorating the toilet can be found on the Internet. Even if the repair in the toilet with your own hands fails, there is always the opportunity to turn to real professionals. They will fix all the bugs in the design of the toilet and make the room beautiful.

When creating a toilet design, many apartment owners use material such as plastic panels. They are inexpensive, and with their help you can independently repair the bathroom.

Types and characteristics

PVC panels are made by forcing the initial liquid mass through a forming hole. As a result, air space is formed in the panels. This feature of the material ensures its low weight. Manufacturers produce plastic panels in the following sizes:

• width - 12.5-50 cm;
• length - 260-300 cm;
• thickness - 8-12 mm.

According to such a criterion as the scope of plastic panels are divided into wall and ceiling. The former are distinguished by higher strength characteristics and have good resistance to mechanical damage. If we talk about ceiling, then their feature is good flexibility and minimal weight.

Many people, when it comes to bathroom renovations, opt for PVC slats. They make such a decision, focusing on the advantages of this material. Among his most significant virtues can include the following:

Disadvantages of PVC panels

Like any material, PVC panels have certain disadvantages. It is worth knowing about them for apartment owners who have conceived DIY bathroom decoration.

When the toilet is finished with this material, it is fixed on the rails. As a result, the free space in the room is reduced. This is especially not liked by those apartment owners who have standard separate bathrooms.

If your apartment is subjected to a flood, then the task of drying the room will become quite difficult. Water can easily seep into interpanel seams and will take a long time to evaporate. This can lead to the occurrence of such unpleasant phenomena as mold and fungus. In some cases there is a need for partial dismantling panels.

The choice of plastic panels for finishing the toilet

Each apartment owner, when performing repairs, of course, strives to get an interesting design of the room as a result. Such a desire arises not only during the repair of the living room, but also when the lining of the toilet is carried out, which should also look attractive. Many people opt for plastic panels, which are inexpensive and easy to install.

A beautiful toilet can be obtained if you approach the task of choosing it correctly. And to do this is not so easy. And it's not just that there is a wide variety of PVC panels on the market. Often unscrupulous sellers offer defective products. In order to buy really high-quality material, it is necessary when choosing plastic panels to remember the following recommendations:

• plastic panels that will be used to decorate the toilet in your own apartment should be made of PVC with additives that increase the elasticity of the material. The smaller they are, the more brittle the plastic is. The presence of additives in the composition of the material can be determined quite in a simple way. It is necessary to take the panel at arm's length and begin to bend. Do this until you feel strong resistance. If the plastic has high quality characteristics, then it can be easily bent into a ring. The worse the quality of the material, the smaller the bending radius;
• When choosing PVC panels, you should pay attention to the material from which the lamellas are made. It should not emit any odors. If you feel a chemical smell, then you should refuse to purchase such panels and look for something else.

How to sheathe a toilet with plastic panels?

Finishing the toilet with plastic panels with your own hands is not a difficult task. If you have the skills to work with a tool, then you can easily master the installation of PVC panels. Competently carrying out this work will allow you to create an interesting design in the toilet. To make your wish come true - make quality toilet repairs in the apartment, you need to find in your schedule free time and prepare before work starts necessary materials and tools.

Of course, in order to create a beautiful toilet in your apartment, you cannot do without materials and tools. To cover the toilet with plastic panels, you will need:

Do not immediately rush to the store to purchase panels. First, you should measure the area of ​​\u200b\u200bthe toilet in which you plan to carry out finishing work. When you receive material calculations, then 15% should be added to this amount, which will be used for cuts.

Preparatory work

Lining the toilet with PVC material for many apartment owners is best solution when renovating a bathroom. For to make everything go smoothly and in the end you got a beautiful toilet with interesting design, repairs in this room should begin with preparatory work. Experts recommend that the first step is to remove the old finishing material from the walls. This will slightly increase the usable space of this room.

Before starting work, work should be done to replace water pipes and electrical wiring. Walls before installation of the material should be treated with a primer. Choose a primer that has antibacterial properties. In this case, at high humidity, mold and fungus will not appear on the walls under the panels.

Before you start working with plastic panels, you should also think about where the sink and cabinets will be placed in the bathroom. In these places, additional strips should be provided. It is on them that the accessories will be fixed. Before doing material installation, it is necessary to keep the lamellas at room temperature for several hours.

How to finish the toilet with plastic panels: installation

The first step is to fix the aluminum profile rails or plastic rails on the wall. In a horizontal orientation, the installation of a wall crate is performed. The ceiling is laid perpendicular to the direction of laying the material. A step of 50 cm is maintained between the guides. Some designers opt for a diagonal fastening of the material. If such original version you like the design, you should know that its implementation will lead to an increase in material costs.

You can immediately fix the U-shaped corner profiles. Next, the first panel is carefully inserted and fixed with prepared self-tapping screws. Some craftsmen use a construction stapler to secure the panels. . However, this type of fixation can only be used in relation to the wooden crate, which is a completely unsuitable material in the toilet.

Next, step by step, you should fasten the following panels, which must be pressed very tightly to the previous ones. The crucial moment when installing PVC lamellas in the toilet is the fastening of the last panel. An accurate calculation of the remaining width must be made. If you do not pay attention to this moment, you can ruin the entire structure.

You can proceed to work such as lining the ceiling in the toilet only after all the work on mounting the panels on the walls has been completed.

If your plans include spot lighting in the toilet, then you need to cut holes according to the size of the lighting fixtures. In addition, it is necessary to make holes in the installation sites of sockets and switches, as well as ventilation pipes. Cutting material for wall and ceiling decoration must be done from the front using a jigsaw or hacksaw with a tooth pitch of 1 mm.

When the panels are fixed, you can proceed to the installation decorative plinth. You can choose products made of plastic or ceramic.

Conclusion

When repairing a toilet, many apartment owners choose PVC panels for surface finishing. To get beautiful finish toilet with plastic panels, photo design projects on the Internet should be studied first. This will help determine the design of the room.

It is not difficult to create a beautiful toilet in your home. Just need to find free time and prepare materials and tools. Quality repair toilet with plastic panels, will allow you to get an aesthetic design of this room. Her original design will be a source of pride for the home master.