In order to get a really beautiful and unique interior, it is important to choose the right materials. Each composition has its own grain size and marking. When buying, do not neglect the advice of the seller, who will help you understand the choice of material. In addition, textured paints are divided into the following types:
You must know exactly what end result you want to achieve. Draw a drawing or look at photos of the interior on the Internet. Before applying paint, test it on an inconspicuous area and see what comes of it. Do not forget about eye protection, skin protection and good ventilation of the room. The application of textured paint does not tolerate frivolity.
Preparing walls for painting
You need to start work in order to protect surrounding objects from getting paint on them. With the help of film and masking tape, we cover unnecessary items, including the floor.
We remove old wallpaper, paint from the walls, greasy spots or other finishing material. To do this, you can use a spatula, sandpaper or chemical tools. It is important that the surface is dry, clean and does not crumble.
If there are cracks, cavities or irregularities on the wall, then they can be repaired with plaster or putty. Try to level the surface as best as possible, not hoping that the paint will hide the flaws, because this may not happen.
After the putty has dried, you need to paint the wall with a special primer. This will give good adhesion or, in other words, adhesion of the paint to the surface. In addition, consumption will be significantly reduced. It is important that the color of the primer does not differ from the paint you have chosen.
After at least 5 hours, you can paint the walls with textured paint. First you need to stir it until a homogeneous mass. Then add the pigment of the chosen color and stir again.
The process of applying textured paint
Paint can be applied different ways. It all depends on what effect you want to get. But they all have a few things in common:
- the first layer is applied with a wide spatula, working alternately in areas of no more than two square meters;
- for hard-to-reach places, a narrow spatula is ideal;
- then we wait for the complete drying of the first layer. Usually, it takes about 24 hours.
Painting can be done with a foam roller, trowel or rubber roller. Let's consider these methods.
With foam roller
We apply the composition to the wall with a spatula and level it. Then we roll it along the wall with a roller, creating the texture we need. After complete drying, paint the walls with a special enamel with a brush and sand with a grater. The last layer is applied with a fine pile roller, using mother-of-pearl enamel.
With the help of a trowel
The composition is applied to the surface in two layers. The first - with a wide spatula, the second - with a trowel. After complete drying of the paint, the surface can be covered with white enamel with a matte sheen.
Textured wall paint with a roller
We apply textured paint to the wall with a spatula. Immediately after that, with a roller we give the desired texture. Leave the surface to dry completely.
If you have imagination and some skills, then with the help of textured paint you can create very interesting patterns or whole pictures. At the end we will look at how this can be done, but there are more simple ways. For example, chaotic movements with a spatula can create interesting patterns. In addition, winding the rope around the roller and dipping it in paint, draw it from the bottom up. The end result should be a pattern in the form of bamboo. There is another interesting method. To do this, you need to crumple the paper and put it in polyethylene. By pressing on the wall, you can get patterns that look like flowers. Even with a wet cloth, you can achieve an unusual design. To do this, just take a wet rag and start hitting the wall with it, getting interesting and unique patterns.
How to make an interesting design with textured paint
With the help of textured paint, you can get not only interesting patterns and textures, but also very beautiful two-color drawings. Recently, it has become quite popular. The work can be done by hand. It is necessary to draw strokes with a sharp object into which mixtures of a different color must be applied. For work, you can use a stencil.
To create extraordinary appearance, you can use various geometric patterns. Use masking tape to paint. Glue the tape on the fresh paint for the print we need. Then paint the area with a different color.
The simplest method is carried out using an ordinary comb. To create an unusual two-color coating, swipe chaotically over the wet paint. At correct technique execution, the result should please you!
Conclusion
As we saw from this article, there are many ways to decorate walls beautifully and unusually. Before buying, we recommend that you familiarize yourself with the most suitable composition for your home. If you are thinking about redecorating a room in which you are quite a large number of time, then do not neglect the vapor permeability of the paint, because your health and comfort directly depend on it. In addition, do not be afraid to experiment, and you will definitely have a beautiful and unique interior for your home! Painting the walls will help you with this. A textured wall paint will be a great addition to the design.
How construction material decorative textured wall paint is a thick mass (white or dyed with pigments) with various fillers that create a relief texture when applied. The paint has the ability to hold the applied pattern until it is completely cured.
The thickness of the allowable staining layer makes it possible to fill in minor surface defects, and the texture itself visually hides the unresolved irregularities of the plane treated with this composition.
Preparatory leveling of plastered walls for the upcoming painting is a rather laborious process. Often, to speed up the time, plasterboard sheathing is used. Such a decision leads to the loss of a certain part of the usable area.
The problem is removed by the applied decorative layer of paint, which only acquires an even more unusual spectacular look from the game. luminous flux on a relief pattern.
Painting decorative plaster (2019)
Video lesson! How and how to paint decorative plaster, very simple and affordable way decorating…
- Versatility. Used for both internal works as well as for outdoor. It is applied to wood, concrete, brick, metal and some other surfaces. Also, textured plaster is used to finish the ceiling.
- Sustainability. She is not afraid of frost and moisture. It also has soundproofing properties.
- Environmental friendliness. Consists of natural ingredients. Does not absorb harmful substances from the environment.
- Durability. Finishing the walls with drywall plastering and painting? With the correct application of the plaster, you will get an excellent coating that is resistant to mechanical stress.
- Masking. Perfectly levels walls and hides cracks.
Main varieties
Acrylic. The key ingredient is acrylic resin. To prepare for use, simply mix the contents of the container. There are practically no differences in quality between different manufacturers.
The difference is only in price.
Silicone. The main component is synthetic polymer resins. It has a long service life and high resistance to temperature changes, so it is often used for outdoor decoration.
Mineral. It is made on the basis of lime hydrate. Supplied dry.
Before use, the material must be diluted with water and mixed thoroughly.
silicate. The dominant binder component is liquid glass. This material has proven itself through the possibility of application to almost any surface.
Due to these factors, it has a rather high cost.
To create a background interior, textured wall painting is used. water-based paint, since it is these materials that are produced as a white base for subsequent giving them desired color individually packaged pigments.
Acrylic. Allows you to work with any materials, easy maintenance, but relatively short-lived.
Silicone. It makes it possible to obtain vapor-proof, pleasant to the touch surfaces, to create unusual effects similar to "silk fabric".
Mineral. In fact, ordinary plaster, in which cement is added for greater viscosity. Great for exterior finish, indoor use is in question, but in industrial-industrial styles it will be appropriate. In combination the cheapest solution.
silicate. A relatively new guest on the market and not the most a budget option. Used for the treatment of cement-lime surfaces.
For those who can't find suitable option according to your taste, there are dry mixes in which you can add the necessary dyes and fillers to obtain the desired effect. Let's dwell on this in more detail.
When creating an exclusive interior of a room, textured wall painting is an excellent solution. Such a finish does not require special skills or sophisticated equipment, all work is carried out exclusively by hand, which allows you to show imagination and realize design solutions. For painting, special textural and decorative mixtures or traditional compositions applied in a certain way are used.
Any traditional types of compositions can be used for painting, but the best result is achieved when choosing special options that are divided into decorative and textural.
Decorative varieties include:
- Mother-of-pearl. Imitate silk fabrics.
- Mosaic. Due to the application with a spray gun, an interesting texture is formed.
- Velor. The inclusion of hard particles gives the coating depth and softness.
Combined decor gives good results But texture paints deserve special attention, which make it possible to obtain a relief surface. This category includes the following options:
- Marseille wax. Allows you to create amazing custom structures.
- Misuri. The resulting layer may have a well-defined relief.
- Atacama. The necessary texture is achieved due to sand and metal particles in the composition.
- Mixes with natural fillers. It can be sawdust or quartz chips.
Each type of composition gives its own texture. To enhance the effect, varnish or wax is used.
On a note! In addition to creating a decorative relief, this method of painting allows you to hide minor wall defects.
Options for obtaining the desired invoice
To obtain an unusual relief, there are various ways using a variety of tools and fixtures.
In general, any suitable materials and tools. Even with your hands you can create an interesting relief.
If desired simple tools you can create genuine masterpieces on the walls
Advice! It is recommended to test all created effects on a small area of plywood or cardboard, this will give an idea of the final result.
How to apply paint
To get it right, the process is broken down into three standard sequential steps: preparation, grounding, and painting.
Training
Action algorithm:
The surface must be smooth and without defects. If you want to enhance the visual effect, then the base is given the desired geometry in advance. An example is a small wall slope from top to bottom, which will be an excellent addition to horizontal straight or wavy stripes.
Primer application
Priming is an important procedure that ensures reliable adhesion of the applied composition. The deep penetration solution is laid with a roller, it is necessary to process all areas. The number of layers varies from 2 to 3, before applying the next coating, wait for the previous one to dry completely.
The application of primer is a mandatory procedure for any artistic finish. It is better to choose the composition of a well-known and trusted manufacturer, this will guarantee a good result.
Coloring
To get beautiful textured walls exclusively with your own hands, you need to follow some rules, especially when using special texture compositions:
- Preparation of the solution is carried out exclusively according to the manufacturer's instructions. It is not recommended to dilute such mixtures, only if necessary, but the amount of thinner should not exceed 1-2% of the total paint volume.
- The surface is divided into conditional sections. Due to the rapid setting of the composition (15 minutes), the mixture should be applied to an area of no more than 2–3 m 2. This will create the desired relief.
- The design is thought out in advance and the necessary texture is selected.
If any pattern is provided, then marking is performed before applying the compositions General painting technology:
- The base coat is applied first. For this, a water-based acrylic composition is suitable. The need for such a layer is determined individually.
- Then the base is laid. The desired relief is formed with a suitable tool.
- After drying, the surface is covered with wax or varnish.
There are 4 basic ways to apply texture to the wall You can simplify the work by inviting a partner who will be responsible for the texture or application of the composition.
Should know! Lighting is an important detail. You should paint with exposed light sources, this will allow you to evaluate the resulting texture and, if necessary, make adjustments.
To get an excellent result, staining should be carried out in good light. Methods for applying textured paint
There are various methods that allow you to realize the ideas of decorating a house or apartment.
This technology includes two methods:
With a regular comb, you can apply a very original pattern. In both cases, at the final stage, the surface is treated with a transparent or matt varnish.
stone effect
This finish allows you to get a textured coating that imitates stone cladding. Scheme of work:
Each method must be adapted to a specific situation, this will allow not only to realize the idea you like, but also to achieve individuality.
VIDEO: how to apply textured paint on the walls with your own hands
In any room one of the most important elements decor is wall decoration. But literally everyone finishing materials there are some disadvantages that limit their use in the interior of the premises.
But this in no way applies to embossed paint, because its use is not just beauty, but also safety and environmental friendliness.
Therefore, textured wall paint is just the option that is great for interior and exterior decoration. With it, you can create incredible beauty walls, it is enough to connect the fantasy.
How to work with such paint?
People who have never worked with such material before are wondering how to apply textured paint. I would immediately like to say that it is easy and simple to work with her even for those who have no experience in construction and finishing works.
But most importantly, with the help of textured paint, you can create your own unique image or simply fix something that didn’t work out before or didn’t like at all.
A bit of training
Yes, to "fill your hand", it is better to practice. In this case, you do not have to spoil the wall. It is quite possible to hone the skill even on a piece of plywood. Or select a small piece of the wall for honing skills, which must first be cleaned of the old primer.
Nuances of use
Textured paint can be applied both indoors and outdoors. The range of surfaces used is varied: wood, metal, brick, foam and gas blocks, concrete, drywall, OSB, DSP, plastic.
It is also applied to a layer of finishing putty. The paint masks cracks, giving the surface smoothness and uniformity.
Advantages and disadvantages
Each type of finish has its pros and cons. But the most important advantage of textured paint is decorativeness. Thanks to the variety of colors and textures, the most daring design ideas can be realized.
In addition, it is this coating that has a long service life. So, if alternative wallpaper lasts a maximum of five to six years, then textured paint, the price of which is quite acceptable, is about ten years. And this is not to mention saving time spent on work.
What does textured paint look like?
home distinguishing feature of this material - composition and appearance. It is a translucent substance of high strength. Primary in it is acrylic, secondary - a variety of additives.
With the help of color, you can create any color shade. Photos of textured paint, as well as its application, can be viewed on the net.
What other benefits does paint have?
The advantages of a relief coating are many:
- high resistance to UV rays;
- elasticity;
- moisture resistance;
- does not absorb foreign odors;
- does not get dirty, as it does not accumulate dust.
An indisputable advantage of the material is hypoallergenicity. Reviews of textured paint can be viewed on various sites that talk about the finishing material.
little secrets
In addition to the competent application of the mixture, it is also important to take into account some subtleties:
- there are textures that are not recommended for use at too low or high temperatures;
- it is important to take into account the humidity, which should not fluctuate from the norm;
- one layer should be no more than one and a half centimeters;
- on a flat surface there should be no sharp drops, roughness;
- mix to use no more than the specified period.
For greater quality, it is necessary to use such secondary coatings as: acrylic, wax, varnish. Such an additional step will preserve the integrity of the coating, enhance the effect and balance the color.
Summing up
So, as stated above, this species paint is literally universal, since it can be used both indoors and outdoors. In addition, the surface can be very different. With its help, you can mask the existing flaws or create a unique image.
But most importantly, in order to bring your plans to life, you must carefully study the instructions for a specific type of embossed paint and fulfill all the conditions intended for use.
High-quality textured paint and your imagination can work wonders.
Photo of textured paint
Not many people know that the walls can not just be done, but a beautiful relief with textured paint can be made. Such a coating is an alternative, but its main difference is in a thinner layer of application. There are many techniques with which you can create an imitation of natural materials, such as leather or brick. In today's Homius review, we will talk about all the pros and cons of the texture, properties and components, as well as the basic techniques for applying the composition.
Textured paint is a decorative coating based on acrylic and polymer components that give the surface a beautiful embossed look. In its consistency, it is more reminiscent of. Many compositions contain special additives that accelerate the drying time of the layer to 1-2 hours.
A beautiful effect on the surface and the play of shadows appear in natural or. To apply it, you do not need to level the walls to an ideal state, it is enough to putty large irregularities, and then apply a texture with a textured effect.
textured paint
What are the types of textured paint for wall decoration
Related article:
From the article you will learn what plaster is used for, how it is classified by materials and technologies, how to analyze costs when using it, photo ideas and professional advice.
Decorative options for painting walls with textured paints
With the help of textured coatings, wall and ceiling surfaces in residential areas are often finished; they are perfect for both and. All structures are classified into standard and coatings with unusual decorative effects.
Standard coating textures
Depending on the components of the textured paint, you can get a variety of decorative relief in the finish.
| Invoice type | Description |
| Composed of modified starch and acrylic components, the coating may have a smooth or wavy surface. |
| Solid particles in the composition create the effect of smudges, waves, cracking. |
| The composition includes artificial wax components, thanks to which the structural coating, after drying, acquires the effect of an aged stone. |
| The surface has a rough structure due to quartz sand, special components give the finishing paint a touch of metal. |
| The texture allows you to achieve uneven painting with imitation, metal or ordinary plaster. Outwardly, it resembles sandpaper or orange peel. |
Exquisite and unusual effects of textured wall paints
For the interior, you can choose textures with an unusual effect.
| Type of texture paint | Description |
| Cotton and cellulose fibers give an unusual effect of a velvet or silk surface. |
| Pearl shade fills the room with extra light. It is recommended to choose it for rooms whose windows face north - mother-of-pearl visually gives a feeling of warmth and comfort. |
An unusual effect is given to textured paint by the inclusion of quartz sand, shells or sequins, due to which a rough surface is obtained.
Advice! Pearlescent dye gives the room dynamics, creates a certain energy, which increases efficiency. The matte finish has a calming effect, in addition, ultraviolet rays scatter when it hits it, thereby hiding minor imperfections in the finish.
Related article:
Photos, videos, applications, examples of textures and interiors, the average cost, how to properly apply plaster on the wall yourself - you will find all this and much more in our material.
Leading manufacturers of decorative textured paints
When choosing textured paints, it is necessary to focus on the manufacturer, since unverified firms can produce a low-quality product, this will affect the result of the finish. It can be noted well-known companies that offer inexpensive formulations with a variety of effects:
- paints amour color are the most popular, they have increased durability and a variety of shades;
- "Lacra" – Russian manufacturer, produces high-quality relief textures;
- well-known manufacturer Clavel offers compositions with imitation of aged surfaces, silk, velvet;
- brand VGT from the Russian Federation produces invoices adapted to our climatic conditions;
- blancolor produces durable textures with imitation of a silk surface and waxed plaster.
So that in the process of painting the walls with textured paint there are no unpleasant surprises, it is important to choose the right composition. To do this, you should first study the features of each type of coating and accurately determine the texture and desired shade.
Features of the choice of washable textured paint for the walls of the kitchen, corridor and bathroom
You should choose coatings with increased moisture resistance. In the kitchen and in the corridor, there is a high probability of contamination, so the main criterion is the possibility. Having studied all the compositions, we can say that preference should be given to acrylic paint - it has excellent characteristics and a rich palette of shades. With the help of interesting application techniques, you can achieve a unique visual effect.
What texture paint is suitable for living rooms
For living rooms, silicate textured paint is suitable, provided that the surface is well leveled beforehand. The coating has a translucent structure and will emphasize all defects. It should be applied in an even layer without additional relief, it is advisable to choose light shades. And for the walls, you can choose a texture with an unusual effect, for example, velvet or wet silk.
Textured exterior paint
Buildings should choose textured paint, which includes special additives that increase the resistance of the coating to temperature extremes, ultraviolet radiation and high humidity. Acrylic compositions fade in the sun, so it is better to refuse them, but vinyl mixtures are just right for painting facades. In addition, silicone and silicate textures can be used.
Related article:
In the publication, we will consider the positive qualities of the material, the types of composition, methods of application. Recommendations for the preparation of the base, methods and technologies for applying the composition, an overview of the estimated cost of plastering facade works.
Do-it-yourself textured wall painting: tools and application technology
To apply textured paint with your own hands, brushes, sponges, and various rollers are most often used. In the process of work, you should adhere to one application technology throughout the room, otherwise the effect will not be so beautiful.
Preparatory work before applying textured paint
Before applying textured paint with your own hands, you need to prepare the surface. The order of work is the following.
- Lay the film on the floor and fix it with adhesive tape on the ceiling to prevent splashing during operation.
- paying attention to deep cracks and irregularities.
- Coat the surface with an acrylic primer to improve the adhesion of the paint to the substrate. For work it is better to use a roller, the composition must be applied evenly.
Methods for applying textured paint with your own hands
Before painting the walls with textured paint, a toolkit must be prepared with which the surface will be embossed:
- containers for water and paint;
- building brushes with pile of different hardness;
- sponge;
- spatulas, trowels, construction graters;
- brush;
- rollers to create a rough base;
- trowel;
- overalls, glasses, gloves, cap.
Advice! The composition should be applied from top to bottom to avoid smudges. First of all, you should start working from those places that are poorly lit - this is a kind of training before processing the central zones.
Technique for applying textured paint with a roller and sponge
Consider step by step the process of applying textured paint for walls with a roller and a sponge with your own hands. First, the composition must be mixed well until a homogeneous mass is obtained.
| Illustration | Action Description |
 | Apply the white paint evenly to the surface of the wall using a medium pile roller. Drying time - 6-8 hours. |
 | Soak a natural sponge in cold water and wring it out well. |
 | Wet the sponge into the composition and apply it with plugging movements to an area of 1-2 square meters. m. It should take no more than 15 minutes to work, during which time the coating will dry out a little. |
 | Moisten the surface with water using a spray bottle. |
 | Smooth sharp edges with a spatula with light movements. |
 | Then you can start finishing the next section. You need to start from the upper left corner, gradually moving down and to the right. After 6-8 hours, the surface will dry, excess protrusions can be removed with sandpaper. |
 | Wax is used for tinting. To facilitate its application, the surface is moistened with water from a spray bottle. Apply the coating to an area of 0.5 m² with a brush. Remove excess wax with a spatula. |
 | Drying time decorative coating– 4-6 hours. |
Step by step application of textured paint with a brush
Consider another way to apply a texture with a chameleon effect with a brush. For work, we need a composition in three shades.
| Illustration | Action Description |
 | After mixing, thick paint is applied to the wall with short, multidirectional movements using a wide brush. |
 | The next day, the wall is ready for further decoration. |
 | The other two tones must be mixed directly on the wall. To do this, alternately apply first one, then another tone with a brush and blend with multidirectional movements on the surface. |
 | When visually inspected from different angles, all shades of the coating appear. |
In more detail, the master class can be viewed on the video:
Why additional processing is needed
After complete drying, interior varnish or wax can be applied to the surface - they will give the relief a more expressive structure. In addition, the additional coating has protective functions against mechanical damage.
The cost of textured wall paint: price overview
Before choosing a textured wall paint, you need to not only familiarize yourself with the photos in the manufacturers' catalogs, but also analyze its cost. Consider the current prices of the most popular inexpensive brands as of November 2018 on Yandex.Market.
| Volume, l | Cost (as of November 2018), rub. | |
| "TATTOO Bucciatoliscio" Producer "ROSSETTI", Italy | 3 | 1 990 |
| VGT GALLERY, Russia | 9 | 1 476 |
| Alpina Expert, Germany | 15 | 1 990 |
Alpina Expert |
||
| FARBE, Russia | 15 | 2 280 |
FARBE paint |
||
| Prorab "Sandeco" | 20 | 1 439 |
Prorab "Sandeco" |
||
The cost of 1 m² of textured paints from European manufacturers starts from 600 rubles.
Conclusion
Now you know everything about textured paints and you can easily choose the composition and apply it yourself. The main thing is to strictly observe the application technology. You can perform a unique surface decoration using not only tools, but also fingers. Handmade patterns will attract attention and emphasize the exclusivity of a modern interior.
If you have any questions, ask them in the comments - our editors will be happy to answer them.
In conclusion, we suggest watching a video on how easy it is to apply textured paint on walls using a relief roller.